Parallel Integrated Controller

Product Detail

AS360 series goods elevator integration drive controller



Features

• Optimal matching based on elevator, elevator control and motor

• The sixth generation of new module is used for hardware, and the resistance to junction temperature can reach 175?, making the switching loss less, and the service life longer

• Dual 32-bit embedded microcontroller processor is used to jointly complete the elevator operationand motor drive control

• Redundant safety design and double safety protection by the control processor and drive processor, realizing the strongest safety protection during elevator running

• All-parallel output mode

• The anti-jamming design exceeds the highest level of industrial design requirements 

• Have rich and advanced elevator operation functions, which can fully meet the various needs of customers

• Passed the "CE"certification of “elevator safety circuit containing electronic components”; and certification of parkinh current detection according to GB7588-2003 12.7.3, which can realize only needing one main contactor in the control cabinet 




Specification data

Model AS360	Rated capacity (kVA)	Rated output current (A)	Adaptation motor (kW)	Model AS360	Rated capacity g (kVA)	Rated output current (A)	Adaptation motor (kW)
200V-level frequency converter				400V-level frequency converter




Item		Technical indicators
Maximum output voltage		Three phase (200-240) V (corresponding input voltage)      Three phase (380-460) V (corresponding input voltage)
Input power supply	Number  of phases, voltage, and frequency	200V-level: =3.7kW single phase or three phase;> 3.7 kW threephase (200-240) V 50/60Hz      400V-level: threephase (380-460) V50/60Hz
	Allowable voltage changes	-15%-+10%
	Allowable frequency changes	-5%~+5%
	Instantaneous voltage lowering tolerances	200V-level: continue to run if above AC180V; If decrease from the rated input state to below AC180V, under-voltage protection after 15 ms’ running      400V-level: continue to run if above AC300V; If decrease from the rated input state to below AC300V, under-voltage protection after 15 ms’ running
Basic features	Floor	2-9floors
	Elevator running speed	=1.75m/s
	Group control units	=8 units
	Communication mode	Parellel
Control features	Control mode	With PG card vector control, voltage vector V/F, open-loop vector S, torque control
	Starting torque	150% 0Hz (with PG card vector control), 120% 0.5 Hz (voltage vector V/F), 150% 0.5 Hz open-loop vector g)
	Speed control range	1:1000 (with PG vector control}, 1:200 (without PG vector control)
	Speed control precision	± 0.02% with PG vector control (25 + 10) ?, ± 0.2% without PG vector control (25 + 10)?
	Torque limit	Yes (set by parameters)
	Frequency control range	(0-120) Hz
	Frequency precision (temperature fluctuations)	± 0.01% digital command (+ 45), ± 0.01% simulation command(25± 10) V
	Frequency settting resolution	± 0.01% digital command(^0-+45) ± 0_1% simulation command (25± 10)V
	Output frequency resolution (computing resolution)	0.01 Hz
	Frequency setting signal	(-10~+10) V
	Overload capacity	150% when at Zero velocity;160% when < 3Hz; 200% when > 3Hz
	Braking torque	150% (External brraking resistor), built-in brake unit
	Acceleration and deceleration time	(0.01-600) s
Protection grade		IP20
Installation mode		Installed in the cabinet

As one of the leading manufacturers and suppliers of parallel integrated controller in China, we warmly welcome you to buy our quality and durable parallel integrated controller with competitive price. We will offer you good after-sale service and fast delivery.